Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Long Beach?
Spring replacement in Long Beach typically costs $180 – $340 for a standard residential double-door torsion spring setup, with single-spring replacements at the lower end and two-spring conversions at the higher end. Most jobs are done in a single visit, and the price includes the springs, labor, and a balance check. If your door uses extension springs instead of torsion, expect a slightly lower figure, usually $150 – $280.
Key Takeaways
- Torsion spring replacement in Long Beach runs $180 – $340 for most homes.
- Springs last roughly 7 – 10 years in coastal air; Long Beach’s salt-laden humidity shortens that compared to inland cities.
- Never wind a torsion spring yourself. The stored energy in a wound spring can cause serious injury – this is a trained-technician job.
- We stock standard spring sizes for LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor doors, so the truck usually arrives ready.
- Same-day scheduling is often possible. Call (866) 477-5637 for a free estimate.
Spring Replacement Cost Breakdown (2026)
Here’s what Long Beach homeowners actually pay in 2026, broken out by the line items we see on real invoices. These ranges are consistent with the rest of our residential garage door service and apply to standard 7-foot and 8-foot residential doors.
| Line Item | Typical Cost in Long Beach |
|---|---|
| Single torsion spring replacement | $180 – $240 |
| Two-spring torsion replacement (both springs) | $260 – $340 |
| Extension spring replacement (pair) | $150 – $280 |
| Spring plus cable replacement (common combo) | $130 – $250 added for cables |
| Spring replacement with roller replacement | $110 – $220 added for rollers |
| Track realignment if springs pulled the door off-center | $120 – $240 |
| Opener adjustment or repair after spring failure | $120 – $320 |
| Panel replacement if a broken spring slammed the door | $250 – $500 |
| Full repair visit (springs + tune-up) | $150 – $600 |
What drives the price up or down? A single-spring replacement in a Long Beach bungalow is on the low end. If your door has two torsion springs and both are worn, we replace them as a pair because a single old spring next to a new one fails fast. Heavier Clopay and Amarr carriage-house doors use uprated springs that cost more. And if a snapped spring sent the door out of balance or a cable jumped a drum, you’re paying for that secondary repair too. That’s why a “cheap” quote of $130 sometimes becomes $400 by the time the door is back on track.
What Affects Spring Replacement Pricing in Long Beach
- Coastal corrosion. Long Beach sits on the water, and the marine layer accelerates rust on standard oil-tempered springs. Spring wire that would last a decade in Riverside may fail in 5 – 7 years here. We typically recommend upgraded galvanized or coated springs for homes west of the 710, near Belmont Shore and Naples, which adds a modest amount to the ticket but buys years of life.
- Door weight and size. A 16-foot double-car door in a Wrigley or Bixby Knolls house uses heavier springs than an 8-foot single door. Carriage-style doors from Amarr and Clopay, common in Signal Hill and Los Altos, run heavier steel and need uprated torsion springs.
- Number of springs. Many Long Beach homes from the 1950s – 1970s had one torsion spring. We often convert to a two-spring setup, which spreads the load and means a failure leaves you a workable door rather than a fully stuck one. That conversion sits at the high end of the $180 – $340 range.
- Whether the opener is affected. A spring failure can damage the opener’s gear train or limit settings. If your LiftMaster or Chamberlain opener needs attention after the spring snaps, you’re looking at adding opener repair in the $120 – $320 range.
- Secondary damage. A broken spring means the door drops under its own weight. That can bend a track, pop a roller, or crack a bottom panel. Repairs to those show up as added charges. Many Long Beach calls that start as a spring replacement end up closer to the $600 full repair ceiling.
- Access and door height. Standard 7-foot doors are our baseline. An 8-foot door or a tight garage in an older Bluff Park home with a low clearance can add labor time.
How Long Do Springs Last in Long Beach?
Most torsion springs are rated for roughly 10,000 cycles, which for a household that opens and closes the door 3 – 4 times a day works out to about 7 – 10 years. In Long Beach, though, that number trends toward the short end because salt air and humidity speed up corrosion. Springs we pull from homes near the beach or in older neighborhoods like Rose Park often show rust pitting well before a cycle-count failure. If you hear a loud bang from the garage, or the door feels unusually heavy when you lift it manually, get it checked before anything else fails.
We work on every major spring and door system, and our spring replacement in Hawaiian Gardens guide shows how the same job prices in a neighboring market for comparison.
How to Save on Spring Replacement
There’s no way around the cost of a good spring, but there are ways to avoid overspending on the visit.
- Replace both springs at once. If one spring fails on a two-spring door, replacing both now costs the same as one replacement plus the second failure three months later – minus a second service call.
- Get a free estimate first. Call (866) 477-5637 and we’ll give you a number before we’re in your driveway. No pressure, no upsell.
- Upgrade the spring, not the whole door. A galvanized spring costs a little more up front but lasts years longer in coastal air. That’s a real savings over a decade.
- Bundle minor tune-ups. If your rollers or cables are close to failing, having them done on the same visit saves the second trip. Roller replacement runs $110 – $220 and cable replacement $130 – $250, both on top of the spring job.
- Address the opener separately. If the spring failure left the opener straining, an opener repair runs $120 – $320. If it’s beyond repair, a new opener install runs $250 – $550.
Signs You Need Spring Replacement (Not Just Adjustment)
Sometimes a noisy or heavy door just needs lubrication and adjustment. Other times the spring is done. Here’s how we tell the difference in the field:
- A loud bang from the garage. That’s usually the spring letting go. The door becomes very heavy to lift manually.
- A visible gap in the spring coil. On a torsion spring, a clean break about a third of the way in is common.
- The door lifts only partway then stops. The spring has lost tension and can’t counterbalance the door weight.
- The opener strains or reverses. When the spring isn’t carrying the load, your LiftMaster or Chamberlain opener does all the work, and it wasn’t built for that.
- A rusted or stretched extension spring. Extension springs that have lost their coils or show corrosion need replacement, not adjustment.
One safety note up front: torsion springs are under enormous tension. We never walk a homeowner through winding one. The stored energy can easily cause serious injury, and this is one job where the right answer is always a trained technician with the correct winding bars and knowledge of your specific door. We show up knowing your door – the spring wire gauge, the drum style, the door weight – rather than figuring it out on arrival.
What System Do You Have?
Most Long Beach residential doors use one of two spring types, and the price differs slightly between them:
- Torsion springs mount on a bar above the door and are the standard for most newer and heavier doors. The cost range is $180 – $340 for most homes.
- Extension springs run along the horizontal tracks on each side. They’re common on older single-car doors and tend to cost a bit less, typically $150 – $280 for a pair.
If you’re not sure which you have, we can tell from a photo or a quick call. Our certified techs work on all eight major brands – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor – so whatever door you have, we’re set up for it.
Does a Spring Replacement Come With a Warranty?
Warranty terms depend on the spring grade and manufacturer, and we’ll spell out exactly what’s covered on your specific replacement before we start. That includes the spring itself and the labor. Ask us for the details on your estimate – the answer varies a little by spring type, so it’s worth confirming on the call rather than guessing here.
Spring Repair vs. Spring Replacement
Occasionally a spring can be adjusted rather than replaced. A door that’s slightly out of balance might just need a tension adjustment. But a broken or corroded spring can’t be repaired back to safe working condition. Torsion springs that have snapped or cracked are replaced, full stop. If you’re not sure which category you’re in, we can look at it and tell you honestly. Our aim is to do the right fix for your specific system, not the biggest invoice.
For a broader view of what garage door service in the area costs, see our Long Beach garage door repair overview and our garage door repair cost guide.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Long Beach?
Spring replacement in Long Beach costs $180 – $340 for most residential doors, including the springs and labor. Single-spring setups sit at the low end and two-spring conversions at the high end. Call (866) 477-5637 for an exact quote – estimates are free.
Can you come today?
Same-day scheduling is often possible for Long Beach spring failures, depending on the day and time. A broken spring leaves the door heavy and unsafe, so we prioritize it. Call (866) 477-5637 and we’ll check availability right away.
Is it cheaper to repair or replace a broken spring?
Replacement is almost always cheaper than repair because a broken spring can’t be repaired back to a safe condition – it’s replaced or it isn’t. At $180 – $340 for a standard replacement, that’s a fraction of what a secondary failure would cost. Call (866) 477-5637 for a free estimate.
How long does the job take?
Most spring replacements take 45 minutes to an hour and a half for a standard Long Beach residential door. If a cable or track was damaged when the spring failed, it can run longer. Call (866) 477-5637 and we can give you an accurate window.
Do you replace springs on all brands?
Yes. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor doors and openers, so most Long Beach homes fall within our scope. Call (866) 477-5637 with your door brand and we’ll have the right spring on the truck.
Call Blackstone for a Free Spring Replacement Estimate
We’re a focused garage door specialist in Long Beach – repair, opener repair, and full installation all handled in-house, not referred out. If your spring has snapped, or if your door has been straining for weeks and you’re ready to know what it will actually cost, call us. We’ll give you a real number, show up knowing your specific door system, and get it working right. Built to last, and built to do it right.
Call (866) 477-5637 for a free estimate.
Pricing reflects the Long Beach market as of 2026. Blackstone Garage Door Repair offers free estimates – call (866) 477-5637.
What Our Customers Say
"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty with the right spring on the truck. Door's quieter now than it was before it broke."
— Wade Anderson"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
— Allison Ackerman"Honest people. That's getting rare."
— Kristen Bennett